More content from May 2026

Sacmi
Sacmi has introduced the Linear Blow Forming system that compression-molds preforms, then produces containers with stretch blow molding.
Linear Blow Forming combines compression molding of preforms with stretch blow molding of containers.
May 21, 2026
Meaf Machines BV
Meaf Machines' MDX-IV unit is designed to raise the intrinsic viscosity of recycled PET in the packaging, recycling and film and sheet production markets.
MDX-IV increases intrinsic viscosity (IV) and decontaminates recycled PET; MDX-DEO decontaminates and removes odors.
May 21, 2026
Absolute Haitian
An Absolute Haitian technician works on a press. According to representatives of some OEMs, maintenance is taking on new urgency, as manufacturers look to extend the service life of their machines.
Processors must consider the cost of new equipment against the advantage of running the latest technologies.
May 20, 2026
Rosti Germantown
The centerpiece of Rosti's new clean room in Germantown, Wis., is a 300-ton injection Toyo Si-7 molding machine.
Wisconsin plant shuffles production, 15 presses to make space for automated line for manufacturing medical devices.
May 19, 2026
Erema GmbH
Erema Managing Director Markus Huber-Lindinger shows off the new LF 812 laser filter on the Erema stand at K 2025.
The Laserfilter LF 812 is double the size of its predecessor and comes in single or twin configurations.
May 19, 2026
Domino Printing Services
The Dx1060i laser coder is easy to integrate into production lines.
Domino's Dx1060i can create complex, durable codes and integrates easily into production lines.
May 18, 2026
Nissei America Inc.
Nissei America has begun actively proposing preventive maintenance and inspection plans to customers.
OEMs offer subscription packages, training, remote monitoring to help manufacturers keep machines running.
May 18, 2026
Bekum Maschinenfabriken GmbH, Berlin
A Bekum technician uses Industry 4.0 tools to look over a machine. Increasingly, Christian Richard, corporate communications manager and sales administration manager for the OEM, said, “Maintenance in extrusion blow molding is no longer reactive — it is strategic.'
Connected equipment and condition-based monitoring enable earlier intervention, improving reliability while reducing unnecessary maintenance and operational disruptions.
May 14, 2026
C.S.I. Centro Servizi Industriali
In the three-stage separation section, O-rings and other molded parts are separated from gating and overflow material.
The macrofinishing machine from C.S.I. Centro Servizi Industriali eliminates the need for liquid nitrogen and PC blasting media.
May 14, 2026
Brett Greenhalgh
Brett Greenhalgh, who has worked at KraussMaffei Corp. for about 2 years, says he will miss interacting with people at the company, but is looking forward to taking on a role as a missionary, alongside his wife, Janice, in Germany.
President and CFO is leaving the job to do missionary work with his wife in Germany.
May 13, 2026
Pellenc ST
Pellenc ST has incorporated CNS Brain and AISort artificial intelligence technologies into its multimaterial sorting systems.
CNS Brain and AISort now work on Mistral+ and Mistral+ Connect for sleeve separation on clear PET bottles.
May 13, 2026
Hasco
These Hasco locating rings can be used with the company's thermal insulating sheets.
The newest additions to Hasco's lineup have an extended guide length of 8mm.
May 12, 2026
Break Machinery Srl
Break Machinery's Duo 7000 double-screen system has 1,089 square inches of filtration area and can handle up to 13.2 tons of material per hour.
The maximum flow rate for the Duo 7000 is 13.2 tons per hour.
May 12, 2026
Wittmann USA
A technician crouches beside Wittmann equipment. Like other OEMs, Wittmann is working to make its machines easier to use, with tools that will help processors better spot trends that could indicate future maintenance needs.
Manufacturers can separate from competitors by experimenting with smart technologies to forecast failures, automate diagnostics and reduce costly downtime.
May 11, 2026
Micro-Epsilon
These Micro-Epsilon eddy current sensors can measure gaps and positions on metal rollers.
The eddyNCDT 3005 can be used for measurement on metallic rollers in confined spaces and extreme conditions.
May 8, 2026
Exair
Exair's Varistat Benchtop Ionizer eliminates static without the need for compressed air.
The Exair technology eliminates static without the need for compressed air.
May 7, 2026
Next Generation Recyclingmaschinen GmbH
Designed for processing pre-dried flakes, Next Generation Recycling's new Eco-Twin 220 conical twin-screw extruder has synchronous motors that allow precise control of dosing by detecting torque fluctuations.
New extruder gently melts pre-dried flakes.
May 7, 2026
Kuka
Kuka's KR Titan Ultra heavy-duty industrial robot is built for continuous operation and maximum uptime.
The KR Titan Ultra can carry a payload of up to 3,307 pounds.
May 6, 2026
Simcon
Cadmould AI Solver software generates simulation results instantly, allowing mold makers to explore more variations in less time.
Artificial intelligence provides instant feedback on filling pattern, pressure, temperature and more.
May 5, 2026
Plastics Industry Association (PLASTICS)
Fly-In participants stand on the steps of the California State Capitol.
The March event was part of the association’s efforts to engage constructively with policymakers at both the state and federal levels.
May 5, 2026
Goodway
Goodway Technologies has updated two of its PulseFlo descaling pump systems.
Two PulseFlo portable models have upgrades that enhance safety and simplify the cleaning process.
May 1, 2026
Progressive Components
Progressive Components' new mold cylinders replace existing hydraulic cylinders.
The cylinders from Progressive Components increase surface hardness and sealing ability.
April 30, 2026
Polymer Dynamics
The Maverick 9T is a benchtop injection molding machine with 9 tons of clamping force.
The Maverick 9T from Polymer Dynamics can use standard resins, 3D-printed molds and automated operation.
April 28, 2026
Emergent Vision Technologies
Emergent's eSDK Pro Software Development Kit allows engineers to deploy vision systems more quickly.
Emergent's eSDK Pro kit can reduce programming time by up to 90 percent.
April 23, 2026
BinMaster Sensors and Technologies
Scott Hudson has been promoted to CEO of BinMaster Sensors and Technologies.
The company manufactures sensors and technologies for material management in plastics and other industries.
April 21, 2026
Husky Technologies logo in orange lettering
Wassim F. Labban and Dave Morton have more than 50 years of combined experience with the company.
April 20, 2026
Wittmann Group
Starting in May, Michael Wittmann (left) and Werner Wittmann will jointly manage all business divisions of the Wittmann Group.
The injection molding, automation and auxiliary equipment divisions will be consolidated.
April 17, 2026
Blue and black Xaloy logo
The Italy-based brand will continue to operate with its current team.
April 16, 2026
Guill Tool & Engineering
Stephen Ovren, sales manager for Guill Tool & Engineering.
The company manufactures tooling for extrusion.
April 13, 2026
Blue and gray Uniloy logo
He brings experience from Bekum America and Kautex to the blow molding machine maker.
April 10, 2026