More content from June 2025

Boy Machines
Marko Koorneef is president of Boy Machines Inc.
The president of Boy Machines Inc. sees opportunities in the market for his company's small-tonnage injection molding machines.
June 19, 2025
Henkel
The Sonderhoff DM80 from Henkel was designed for assembling plastic aircraft components.
The Sonderhoff DM80 Static Mix is designed for assembling plastic aircraft components.
June 18, 2025
113088054 © Andrei Rahalski | Dreamstime.com
dreamstime_m_113088054
A successful transaction can breathe new life into a company, but all sides must do their due diligence.
June 18, 2025
Linak
The Elevate-LC3 IC lifting column from Linak acts as a seventh axis to extend a cobot's reach.
The LC3 IC electric lifting column from Linak can raise a cobot more than 43 inches in less than 10 seconds.
June 17, 2025
Guill
Guill's reciprocating head for medical tubing has been upgraded.
The reciprocating head is suitable for making medical tubing.
June 16, 2025
Elegoo
The Elegoo Centauri Carbon is ready to print right out of the box.
The affordable Centauri Carbon is ready to print out of the box.
June 13, 2025
Maxcess
The Tidland SmartSlit from Maxcess is flexible and accurate.
The system from Maxcess can be operated automatically or manually.
June 11, 2025
ITW Deltar Fasteners is proud of its efficient use of space and narrow aisles, as manufacturing engineer Phil Dunn demonstrates.
Insider Package IMMs with automation allow the processor to reallocate floor space, cut scrap and boost the bottom line.
June 11, 2025
Fairino
Fairino, the top seller of cobots in China, has now entered the North American market.
The Chinese-made line entered the North American market this year.
June 10, 2025
Hasco
Hasco's H5055 hole filter has more than 1,000 angled holes to remove metal and impurities from the melt.
The H5055 removes metal and impurities from the melt.
June 9, 2025
Lynxter
The Lynxter S300X-LIQ21/LIQ11 printer can print industrial-grade RTV silicone and PU.
The S300X-LIQ21/LIQ11 can make parts from medical and industrial silicones as well as PU.
June 6, 2025
126009979 © Tupungato | Dreamstime.com
dreamstime_m_126009979
As it heads to the Senate, let your voice be heard on retaining its manufacturing-friendly provisions.
June 5, 2025
Cannon
The Cannon Inline Degassing (CID) system is tailored for production of large components using vacuum infusion, resin-transfer molding or pultrusion processes.
The CID offers higher output, smaller footprint and reduced processing times.
June 4, 2025
Universal Robots
Universal Robots says the UR15 cobot is fast and agile.
It's the latest in the company's high-performance series, with a payload of about 33 to about 39 pounds.
June 4, 2025
Sealpac
A tray produced with a Sealpac F-series thermoformer.
The F-series has smart technology to optimize performance and energy consumption.
May 30, 2025
StackTeck Systems Ltd.
Mike Gould
Vince Travaglini, president and CEO since 2018, has retired from the manufacturer of molds and automation technologies.
May 29, 2025
Epson
Epson says it is using its new GX-C SCARA robots to manufacture its own electronics. This is a GX20C.
The GX-C series comes in four models, with multiple arm configurations and clean-room and electrostatic discharge-compliant versions.
May 29, 2025
Micro-Epsilon
Micro-Epsilon's confocalDT sensors are precise and fast.
The confocalDT sensors are precise and operate at high speeds.
May 28, 2025
Robotiq
Robotiq's PowerPick Multi has a flexible multi-cup array.
The PowerPick Multi can palletize different box sizes in the same line without changing tools.
May 22, 2025