Hasco ejector pins promote venting

    Sept. 20, 2022
    New components allow air to easily escape mold cavity.
    Related To:
    Hasco Hasenclever GmbH + Co KG
    Hasco's Z401 ejector pins allow air in a mold cavity to easily escape.
    Hasco's Z401 ejector pins allow air in a mold cavity to easily escape.

    Z401 These Hasco ejector pins have surfaces designed to allow venting while in mold cavities. The ventilation surfaces extend over a long part of the pins. Pins are available with lengths from 100mm to 315mm, depending on their diameter, which ranges from 1mm to 12mm.  They are interchangeable with Hasco’s conventional ejectors, Z40 and Z41. 

    What’s new? The pins, designed to ensure that the air in a mold cavity can easily escape. Hasco plans to show them at K 2022, which runs Oct. 19-26. 

    Benefits Improved mold performance. 

    Hasco America Inc., Fletcher, N.C., 828-650-2600, www.hasco.com 

    About the Author

    Karen Hanna | Senior Staff Reporter

    Senior Staff Reporter Karen Hanna covers injection molding, molds and tooling, processors, workforce and other topics, and writes features including In Other Words and Problem Solved for Plastics Machinery & Manufacturing, Plastics Recycling and The Journal of Blow Molding. She has more than 15 years of experience in daily and magazine journalism.

    Email

    Request More Information

    By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.

    husky_injection_molding_systems
    Silcotech North America
    The new Neotech Bridge is designed to help mothers and babies with breastfeeding immediately after childbirth. It represents the culmination in a four-year development period involving brand owner Neotech Products and liquid-silicone-rubber molder Silcotech.
    M.R. Mold & Engineering
    Rick Finnie poses with his award as American Mold Builders Association's 2019 Mold Builder of the Year.
    Mold-Masters
    Mold-Masters' Manifold Leak Detection technology performs thermal analysis of a manifold using thermocouples installed in various locations in the equipment.
    Mouldpro ApS
    The hoses are made from polytetrafluoroethylene.